Boltable lifting points.

Safety factor 4:1 in any load direction.

When it comes to lifting loads, boltable lifting points are generally used. In more than 40 years of experience with lifting points, RUD has continually refined them and decisively improved them. Boltable lifting points can be installed as necessary. If they are no longer necessary, they can be removed with little effort. Due to their bolt system for all standard threads, they can be used in a variety of ways. This makes them very flexible in their use.

 

RUD boltable lifting points are designed for a dynamic load of at least 20,000 changes of load; they are tested with an overload of 50 %. Their WLLs range from 100 kg to 250 t. All the bolts on our lifting points for bolt connection (ring bolts) are 100 % crack-tested. Therefore, they offer four times the safety in every loading direction. In addition, all the load-bearing parts have been crack-tested and load-tested in accordance with EN 1677.

 

Important: for the lifting points to be bolted in place, the attachment point must be selected in such a way that the forces introduced are absorbed by the base material without deformation (see respective operating instructions).

 

Looking for the right boltable lifting point?

Contact us now

ICE-BOLT – the new bolt class for lifting points.

In the ICE-BOLT, we have transferred the well-known ICE material of our lifting and lashing chains to many of our lifting points. This makes higher WLLs, smaller bolt diameters and safe deep temperature usage up to -40 °C possible. Other advantages are the improved toughness and thus the higher bending strength as well as a lower wear occurrence.

Find out more about the RUD ICE technology.

Avoid expensive errors when using lifting points.

Bad points.

Wrong lifting point, too small, poorly positioned, insufficiently fastened, no alignment in the force direction – in some circumstances with broken bolt: Many mistakes can occur when lifting or turning loads. These genuine pictures from practice show this.

 

Good points.

Modern and tested lifting points from RUD increase the working safety and reduce handling times. They correspond to Machinery Directive 2006/42/EU, provide safety against breaks in all loading directions and are 100% tear tested and test loaded. Genuine RUD good points.

ACP-TURNADO.

Hoist Ring: The world’s first smart lifting point

  • Unique RUD spring mechanism.
  • No stopping of the lifting bale.
  • No dangerous transverse loads - no worst case.
  • Integrated RFID transponder to make checks easier.
  • Wear lenses for checking discard criteria.
Find out more about the RUD ACP-TURNADO now.

VLBG-PLUS

VIP-Load ring thread plus: Tried and tested and adjustable in force direction.

  • Eccentric split force introduction and bracket adjustable in the direction of the force.
  • Extremely low construction with a pivoting suspension ring.
  • Comprehensive range of threads.
  • The original – now with 45 % greater WLL on average (M8-M30).
Find out more about the VLBG-PLUS now.

VRS.

vario eye bolt Starpoint: clever installation, simple alignment.

  • Much higher WLL than eye bolts in accordance with DIN 580.
  • Oriented towards the direction of the force – no dangerous untwisting.
  • 4 to 5 times higher WLL or half the diameter size that is possible with DIN 580.
  • Comprehensive range of threads.
  • Rotatable through 360°.
  • Easy-fit key for simple installation and removal.
Find out more about the VRS-Starpoint now.

VWBG-V/VWBG.

VIP-Swivel load ring for screwing vario / VIP-Swivel load ring for screwing: versatile, no matter how you turn it.

  • Allows vertical rotating under full load.
  • Optical marking (wear and angle of attachment).
  • 360° rotatable, 230° pivotable.
  • A WLL is permitted at 90° to the load ring plane.
  • Ball bearing.
Find out more about VWBG-V/VWBG now.

Product highlights from the RUD range.

Swivel load ring

VWBG-V/VWBG (VIP swivel load ring for bolting Vario / VIP swivel load ring for bolting)

Product details

PowerPoint

PP-S / PP-B / PP-VIP (universal connection / eye connection / direct VIP chain connection - metric)

Product details

Load ring

RBG / VRBG (load ring for bolting / VIP load ring for bolting)

Product details

Flange load ring

T-FRB / B-FRB (flange load ring head / base flange)

For advice

Lifting point that can be loaded on all sides

B-ABA (lifting point that can be loaded on all sides)

Product details

Straight to the point – simple, convenient, safe: The new lifting point configurator from RUD.

Find the right lifting point for your specific lifting application quickly and easily. Various filter functions and animated 3D views ensure greater safety and the certainty that nothing has been overlooked. Share the results with your RUD expert or dealer and send an inquiry directly. In addition, you will receive valuable additional knowledge that will be available for your daily work.

Register now and benefit free of charge!

Get in touch with us now.

product details